UCON™Quenchant C是由陶氏化学公司生产的不可燃聚合物淬火剂。它是液态有机聚合物和腐蚀抑制剂的水溶液。有机聚合物可溶于水并产生均匀的溶液。然而，在高于74℃（165℉）的温度下，聚合物从水中分离出不溶相。冷却速率也通过调节骤冷浴温度和/或搅拌速率来控制。 UCON Quenchant C和其他UCON Quenchant的主要区别在于它们的分子量较低，在盐水之间的范围内提供了均匀的传热。

UCON™ Quenchant C is a nonflammable polymeric quenchant manufactured by The Dow Chemical Company. It is an aqueous solution of a liquid organic polymer and a corrosion inhibitor. The organic polymer is soluble in water and produces a homogeneous solution. At temperatures above 74°C (165°F), however, the polymer separates from water as an insoluble phase. The cooling rate is controlled also by adjusting the quench bath temperature and/or the rate of agitation. The major difference between UCON Quenchant C and the other UCON Quenchants is their lower molecular weight, which provides uniform heat transfer in the range between brine and water.

用于：稀薄淬透性钢的硬化稀薄合金钢的诱导硬化深槽表面应用单一浓度的聚合物，在薄的和重的锻造，铸造和/或锻造铝合金范围内运行，以好大限度地减少变形的物理现象非金属如钛合金，铍青铜和青铜等。优点：FM认证低劣化和/或氧化速率消除油淬火剂常见的烟雾，烟灰和残渣水溶性和耐细菌生长。典型性能粘度：粘度 -  100°F 375-565 SUS比重重量：1.098（20/20°C）倾点：-20°C（ASTM D97）每加仑重量：9.14磅/加仑（20°C）供货情况：亚太欧洲拉丁美洲北美

Used In:

Hardening of lean-hardenability steels

Induction hardening of lean alloy steels

Deep case pattern applications

Single-bath concentrations of polymer that operate over the range of thin and heavy wrought, cast, and/or forged aluminum alloys for maximum physicals with low distortion

Non-ferrous metals such as titanium alloys, beryllium-copper, and bronzes

Advantages:

FM Approved

Low deterioration and/or oxidation rate

Eliminate smoke, soot and residues common to oil quenchants

Water soluble and resistant to bacterial growth.

Typical Properties

Viscosity: Viscosity - 100°F 375-565 SUS

Specific Gravity:  1.098 (20/20°C)

Pour Point:  -20 °C (ASTM D97)

Weight per Gallon: 9.14 lbs/gal (20°C)

Availability:

Asia Pacific

Europe

Latin America

North America