使用FASTRACK™2706聚合物乳液来制造水性交通标志涂料，与醇酸树脂相比，它具有相当的安全性，应用和环境优势。采用获得专利的Quick Set技术，可改善潮湿环境下的干燥状况，抵御早雨和无追踪时间。

Use FASTRACK™ 2706 polymer emulsion to create waterborne traffic marking paints that offer substantial safety, application, and environmental advantages over alkyds. Incorporates patented Quick Set technology for improved dry under humid conditions, resistance to early rain, and track-free time.

优点：环保可以配制成低至0.8磅/加仑的挥发性有机化合物，符合或超过大多数交通标志涂料的规定。玻璃珠的更好保留与水性丙烯酸配制的涂料在老化时保持其弹性，并保持玻璃珠长于典型的醇酸树脂更长的“使用寿命” ;经过适当的配制和使用，水性交通涂料能够更长时间地保持其反光性能，因此需要重复使用的次数减少。工作人员的安全性更高。挥发性有机溶剂的暴露程度大大降低。更加安全的清洁几乎完全可以使用水和轻度溶剂或清洁剂。处理成本大大降低水性丙烯酸涂料可固化容易并作为无害废物处置典型性质密度：1.13G / ml（干）类别：丙烯酸粒度：0.2微米pH：10.0-10.6粘度：<250（CPS）可用性：北美洲

Advantages:

Environmentally acceptable

Can be formulated to VOCs as low as 0.8 pounds/gallon, meeting or exceeding most regulations for traffic marking paints

Better retention of glass beads

Paints formulated with waterborne acrylics retain their flexibility on aging and retain glass beads longer than typical alkyds

Longer "useful life" when properly formulated and applied, waterborne traffic paints retain their retroreflectivity longer, so reapplication is required less frequently

Increased worker safety

Exposure to volatile organic solvents is greatly reduced

Easier, safer cleanup

Can be done almost exclusively using water and mild solvents or detergent

Significantly reduced disposal costs

Waterborne acrylic paints

Can be solidified easily and disposed of as non-hazardous waste

Typical Properties

Density: 1.13 G/Ml (Dry)

Class: Acrylic

Particle Size: 0.2 Micron

pH: 10.0 - 10.6

Viscosity: <250 (Cps)

Availability:

North America

产品购买 样品购买