ENVIROSTRIP™787工艺是一种更快速，高负荷，无污泥的硝酸锡/焊料剥离工艺，能够保持金属装载量超过150 g / l（20 oz。/ gal。），批量生产。

ENVIROSTRIP™ 787 process is a faster, high-loading, sludge-free nitric tin/solder strip process, enabling metal loading in excess of 150 g/l (20 oz. /gal. ), while maintaining the line speeds required for high-volume production.

优点：更快的锡/锡条速度，提高生产线速度，在相同生产线速度下具有更高的负载高负载，典型的操作比重为1.38或更高，大大降低了运行成本降低了操作成本降低了循环时间无需更换计划PM之间的扩展时间更少的堵塞喷嘴稳定 - 状态，进料和出料过程，增加正常运行时间适合SPC监测的稳定过程特征基于硝酸的配方对黄油涂层没有影响，无需测量典型性能比重：1.2 g /cm³pH：<1.0闪点：93°C（200°F）外观：琥珀色液体可用性：北美洲

Used In:

Tin and tin-lead stripping

Advantages:

Faster tin/solder strip speed

increased line speed and higher loading at the same line speed

High loading, typical operating specific gravity of 1.38 and higher greatly reduced operating cost

Reduced cycle time

Sludge-free

Extended time between scheduled PMs

Fewer plugged nozzles

Steady-state, feed-and-bleed process

increased uptime

Consistent process characteristics suited for SPC monitoring

Nitric acid-based formulation

No attack on buttercoat and no measling

Typical Properties

Specific Gravity: 1.2 g/cm³

pH: <1.0

Flash Point: 93°C (200°F)

Appearance: Amber Liquid

Availability:

North America

产品购买 样品购买