Lewatit®MonoPlus MP 600是一种强碱性，大孔阴离子交换树脂（II型），具有均匀大小（单分散）珠粒，基于苯乙烯 - 二乙烯基苯共聚物，专为所有脱矿应用而设计。单分散珠具有高化学和渗透稳定性。极高的单分散性（均匀性系数：好大值1.1）和极低的细粉含量。与标准树脂相比，0.1％（<0.350mm）导致特别低的压力损失。由于其特殊的大孔结构，Lewatit®MonoPlus MP 600代表天然有机物质的有效吸附和解吸。由于优异的再生效率和高操作性能Lewatit®MonoPlus MP 600通常用于含有二氧化硅和碳二醇的水域xide浓度适中。对于更高的二氧化硅进料，建议使用I型阴离子交换树脂，如Lewatit®MonoPlus MP800.Lewatit®MonoPlus MP 600特别适用于：raquo;采用并流或现代逆流系统操作的工业蒸汽发生用水的去矿物质，例如， Lewatit®WS系统，Lewatit®Liftbed系统或Lewatit®冲洗系统使用Lewatit®Multistep系统或传统的混合床配置与Lewatit®MonoPlus SP 112或Lewatit®MonoPlus SP 112（H）混合工作床与Lewatit ®MonoPlus SP 112（H）Lewatit®MonoPlus MP 600在树脂床上增加了特殊功能：再生和装载过程中的高流量充分利用总容量和低漂洗需求量再生剂，水和溶液的均匀产量，导致均匀的操作区域，在整个床层深度上具有基本线性的压降梯度，允许在床层深度较高的情况下操作，混合床应用中的组分良好分离在II型阴离子交换树脂强碱性组的再生形式逐渐转变为弱碱性组。该过程是官能团的固有属性，并且通过：氧浓度升高（例如从脱气器下游）存在铁，锰，铜等再生温度> 25°相对温度> 30°C

Lewatit® MonoPlus MP 600 is a strongly basic, macroporous anion exchange resin (type II) with beads of uniform size (monodisperse) based an a styrene-divinylbenzene copolymer, designed for all demineralization applications. The monodisperse beads have high chemical and osmotic stability. The extremely high monodispersity (uniformity coefficient: max. 1.1) and very low fines content of max. 0.1 % (<0.350 mm) result in particularly low pressure losses compared with standard resins. Due to its special macroporous structure Lewatit® MonoPlus MP 600 stands for effective adsorption and desorption of naturally occuring organic substances. Due to the excellent regeneration efficiency and high operating capacity Lewatit® MonoPlus MP 600 is generally used for waters in which silica and carbon dioxide concentrations are moderate. For higher silica feeds, a type I anion exchange resin such as Lewatit® MonoPlus MP 800 is recommended.

Lewatit® MonoPlus MP 600 is especially suitable for:

• raquo; demineralization of water for industrial steam generation operated with co-current or modern counter-current systems like e.g. Lewatit® WS System, Lewatit® Liftbed System or Lewatit® Rinsebed System
• polishing using the Lewatit® Multistep System or a conventional mixed bed arrangement in combination with Lewatit® MonoPlus SP 112 or Lewatit® MonoPlus SP 112 (H)
• working mixed bed in combination with Lewatit® MonoPlus SP 112 (H)

Lewatit® MonoPlus MP 600 adds special features to the resin bed:

• high flow rates during regeneration and loading
• a good utilization of the total capacity
• a low demand for rinse water
• a homogeneous throughput of regenerants, water and solutions, resulting in a homogeneous operating zone
• a virtually linear pressure drop gradient across the entire bed depth, allowing operation with higher bed depths
• good separation of the components in mixed bed applications

During the application of type II anion exchange resins in the regenerated form the strongly basic groups are gradually converted to weakly basic ones. This process is an inherent property of the functional groups and enhanced by:

• elevated oxygen concentrations ( e.g. downstream from a degassifier )
• the presence of iron, maganese, copper, etc.
• regeneration temperatures >25°C
• operating temperatures >30°C

应用

吸附剂;化学工业;脱盐;脱盐;能源;交换;工业用水;发电;工艺用水;原水;水处理;

Adsorbing agents

Chemical Industry

Demineralization

Desalination

Energy

Exchange

Industrial water

Power generation

Process water

Raw water

Water Treatment

Synonyms

Lewatit MonoPlus MP 600

产品购买 样品购买