Lewatit®MonoPlus MP 68是一种弱碱性大孔阴离子交换树脂，具有基于苯乙烯 - 二乙烯基苯共聚物的均匀尺寸（单分散）珠粒。单分散珠粒具有化学和渗透稳定性。与具有异分散珠粒大小分布的离子交换树脂相比，优化的动力学导致操作能力增加.Lewatit®MonoPlus MP 68特别适用于：工业蒸汽生成用水的去矿物质以及强碱性离子交换剂，如Lewatit®MonoPlus M 500特别推荐用于Lewatit WS系统（特别适用于腐殖酸和其他有机物含量高的水），电镀漂洗水的处理采用高浓度胡mic acid和其他有机物质，以保护强碱性阴离子交换剂免受污染Lewatit®MonoPlus MP 68在树脂床上增加了特殊功能：在再生和装载过程中具有高交换流量，优异的总容量利用率低漂洗水需求均质的再生剂，水和解决方案;因此整个床层深度的均匀工作区域具有接近线性的压降梯度;因此可以进行更高床层深度的手术

Lewatit® MonoPlus MP 68 is a weakly basic, macroporous anion exchange resin with beads of uniform size (monodisperse) based an a styrene-divinylbenzene copolymer. The monodisperse beads are chemically and osmotically highly stable. The optimized kinetics lead to an increased operating capacity compared to ion exchange resins with heterodisperse bead size distribution.

Lewatit® MonoPlus MP 68 is especially applicable for:

• the demineralization of water for industrial steam generation in combination with strong basic ion exchangers like Lewatit® MonoPlus M 500 (particularly for water with a high loading of humic acids and other organic substances) especially recommended for Lewatit WS System
• the treatment of electroplating rinse waters
• the demineralization of water with a high concentration of humic acids and other organic substances to protect the strong basic anion exchanger from fouling

Lewatit® MonoPlus MP 68 adds special features to the resin bed:

• high exchange flow rates during regeneration and loading
• an excellent utilization of the total capacity
• a low rinse water demand
• homogenous throughput of regenerants, water and solutions; therefore an homogeneous working zone
• a nearly linear pressure drop gradient for the whole bed depth; therefore an operation with higher bed depth possible

应用

吸附剂;化学工业;脱盐;脱盐;能源;交换;工业用水;发电;工艺用水;原水;水处理;

Adsorbing agents

Chemical Industry

Demineralization

Desalination

Energy

Exchange

Industrial water

Power generation

Process water

Raw water

Water Treatment

Synonyms

LEWATIT MonoPlus MP 68

产品购买 样品购买