中文名称:LEWATIT® VP OC 1026
英文名称:Lewatit trial product OC 1026
品类:其他
生产商:朗盛
CAS号:
产品介绍:LEWATIT® VP OC 1026应用于工业水;金属工业;采矿;制药工业/生物技术;工艺用水;净化;回收;回收;去除;冲洗水;分离;水处理;
Lewatit® VP OC 1026 is a macroporous resin based an a styrene-divinylbenzol copolymer containing di-2-ethylhexyl phosphate (D2EHPA). This extracting agent is already included directly during the polymerization, which leads to a high concentration of the active ingredient. In addition, a loss of extractant during operation is minimized (as long as the pH of the process solution as well as rinse water ist kept below pH 4).
Cations are adsorbed by Lewatit® VP OC 1026 in the following order:
Ti4. > Fe3+ > In3. > Sn2,4+ > Sb3' > Bi 3' > V02" > Be2" > Al3" > Zn2" > Pb2" > Cd2" > Ca2" > M n2" > CIF" > Fez" > CO2" > Ni2" > Mg2" > Cr+ > > Alkali
Fields of application:
lt can generally be assumed that Lewatit® VP OC 1026 those components receives from aqueous solutions, which can be removed by means of the liquid extractant D2EHPA from sulfur and hydrochloric acid solutions as a function of pH, e.g.:
Advantages of Lewatit® VP OC 1026 compared to solvent extraction:
Important hints for application:
There is a marked distinction in its physical and chemical properties from those of the known ion exchange resins. The product data summarized in the following pages should be carefully observed. lt has to be emphazised that: The active ingredient of Lewatit® VP OC 1026 is in the form of the acid ester. This means that the form supplied can be directly used. Exposure to sodium hydroxide or sodium carbonate should be avoided since the active ingredient will be displaced from the resin. Also the pH of process solution and rinse water should always be < pH 4. The resin is floating to the liquid surface. Therefore the column should be equipped with an adequate distribution plate at the column's head and be operated upstream.
Due to the specific method of manufacturing the resin has a relatively high percentage offine beads. Therefore it is recommended to use inert resin (Lewatite IN 42) to protect the head distributor against plugging. To protect the bottom distributor a gravel Iayer can be applied.
Backwash can only be carried out in downflow mode by means of an acidic, in minimum 4 % salt containing solution. Backwash water is discharged through a special outl pipe positionned below the ion exchange bed.
The resin can be used without backwashing only in the case that a thorough - pre filtration is carried out. In this case the column is designed with a packed bed, having only 10 % freeboard.
应用
工业水;金属工业;采矿;制药工业/生物技术;工艺用水;净化;回收;回收;去除;冲洗水;分离;水处理;
Extraction
Industrial water
Metal industry
Mining
Pharmaceutical industry / Biotechnology
Process water
Purification
Recovery
Recycling
Removal
Rinse water
Separation
Water Treatment
Synonyms
Lewatit trial product OC 1026
Lewatit VP OC 1026